w404iC & Scanpro iC gen 2 Night Hunting Light and headlamp combo Kit
THE w404ic and Scanpro ic gen 2 combo KIT INCLUDES:
-
1 x W404iC Night Hunting Light with Rear Beam Width Adjustment/Lock and Full Brightness Control
-
1 x ScanPro iC Gen 2 Night Hunting Headlamp with Beam Width Adjustment and Full Brightness Control
-
2 x Intensity Control LED - Your Choice of Green, Red, or White LED's
-
4 x 21700 Li-Ion Rechargeable Batteries
-
1 x 21700 4-Position Charger with A/C & DC charge adapter
-
1 x Gen 4 Quick Detach Adjustable Light Mount
-
1 x Scope Mount with Picatinny Rail - Fits 1" and 30mm Scope Tubes
-
1 x Intensity Controlled Standard Rheostat Tail Cap
-
1 x Intensity Controlled Coiled Cord Rheostat Tail Cap
-
2 x Rubber Halo Shield
-
3 x 18650 Battery Adaptor Sleeve
-
1 x Premium Storage and Carry Case
-
Instruction Manual
-
Limited Lifetime Warranty
Part Numbers:
Green LED Kit: W2070
Red LED Kit: W2071
White LED Kit: W2072
W404iC Protected by US Patent # 11,441,743
The W404iC Night Hunting Kit is our newest intensity controlled weapon mounted kit. The kit features the All NEW Innovative US Patent Pending W404iC light with Rear-Located, Intensity, Spot-Flood, and Lock Mechanism Controls. Also included is everything you need to mount the light to a standard scope (1 inch and 30 mm scope tubes) or picatinny rail on an AR. It also includes premium 21700 li-ion rechargeable batteries and a charger to keep your light running all night long, as well as a handy soft-sided storage case.
Why Intensity Control?
Well, the full intensity control gives the hunter the ability to use less light. Less light = less animals spooked. The intensity control knobs on the W404iC is designed to allow the hunter to set the intensity of the light BEFORE the light is turned on. This allows a hunter to condition the animal to the light by starting on a low power setting and gradually increasing the brightness of the light or headlamp until they have just enough light. Animals tend not to notice the subtle or gradual increase in brightness as much as suddenly being blasted by a bright beam of light. Also, in many situations the light does not need to be on full power to be able to identify the animal. The Intensity Control rheostat knobs allow the hunter to increase the brightness until they have just enough light to make positive identification. This technique completely eliminates the worry of putting too much light on the animal because the hunter can stop increasing the brightness of the light at any time. By using the Intensity Control feature to start on low, then conditioning the animal with a gradual increase in brightness, and stopping when there is just enough light; the hunter will spook less animals, period!
THE W404iC key DESIGN FEATURES:
-
Complete new patented design which eliminates bezel wobble found in lights that accomplish SPOT – FLOOD of the beam by rotation of the bezel
-
The W404iC bezel is fixed in position. The Spot – Flood function is accomplished by extending or retracting the LED position in reference to the fixed position lens via an internal translating mechanism controlled at the tail cap
-
No more rotating the entire bezel – Greatly enhanced ergonomics and ease of control
-
Unique Spot – Flood adjustment lock mechanism
-
Once beam characteristic (amount of Spot – Flood) is adjusted to your preference it can be “locked” in position, preventing unintentional adjustments which can occur in inferior designs when moving weapon from storage cases or racks during transportation to and from hunting stand locations
-
Powerful magnifying spherical lens housed in 75MM Bezel for extreme long range illumination
-
Full Intensity Control LED - allows the hunter to adjust the brightness of W404iC infinitely, giving them more control over the brightness and allowing them to spook less animals
-
Precision CNC machined T6 Aircraft grade aluminum with type III hard anodization
-
O-ring sealed, water resistant
W404iC Full Intensity Control Tail Cap / spot to flood rear controls
-
Full Intensity Controlled rheostat cap that allow the light to be turned "ON/OFF" at ANY power level
-
The W404iC Full Intensity Control Tail Cap out classes the competition with true full-range control of light intensity coupled with selectable "ON/OFF" to any light intensity level the user desires - An industry first-in-class ability! In lieu of using a poorly performing analog circuit design for dimming and intensity control like some competitors use, Wicked Lights uses advanced pulse-width modulation (PWM) technology which provides for a much smoother and wider ranging light intensity adjustment ability and eliminates skewing of LED color which plagues analog designs
-
Full intensity controlled adjustable power output of the LED combined with Patent Pending rear located Spot / Flood control give you absolute control of light output and light intensity depending on the situation and your night hunting style
-
Desirability of this design is easily realized when over a feeder or bait station and having the ability to pre-set the light intensity to the exact intensity for the distance - Not to bright, not to dim, just right, and then turn it "ON" to the exact intensity when needed. The Wicked Lights Design advantage is also easily demonstrated while scanning and having the ability to quickly adjust light intensity up or down based on the animals reactions
-
-
-
Maximum Versatility & Runtime - Operates on either a single 18650 or 21700 rechargeable Li-Ion battery
-
Ships standard with two (2) 21700 Li-Ion 5,000mAh batteries
-
Operates on one battery at a time
-
Run time exceeds 6 hours per battery depending on LED color and intensity setting
-
Gen 4 quick detach windage and elevation adjustable light mount:
-
Includes the NEW Enhanced Wicked Lights Gen 4 Windage & Elevation Adjustable Light Mount System
-
Allows user to perfectly adjust light beam to center of scope cross hair for optimum illumination and field of view
-
-
Industries best picatinny rail interfaceable light mount – PERIOD!
-
Quickly attach light when needed or transitioning from day to night hunting
-
Quickly remove light from scope/weapon when not in use
-
-
-
Includes the picatinny platform (not pictured) which fits 1 inch and 30mm scope tubes
-
Designed to provide light bezel clearance for objective scope lenses (the front of scope) of up to 56MM in diameter
W404iC range and runtime:
ScanPro® iC Gen 2 Headlamp:
The new ScanPro® iC Gen 2 out shines the competition PERIOD! Unlike virtually all headlamps used for night hunting which are simply re-branded utility style headlamps, the Wicked Lights ScanPro® iC Gen 2 Headlamp was purpose designed and built for night hunting. When we say "Night Hunting" were talking a headlamp specifically featured and designed to be used for scanning and locating hogs or predators or their eye reflection while they are responding to a call.
Many expert night hunters appreciate the advantages of using a quality headlamp for "scanning for eyes" as it eliminates both the fatiguing act of repetitious hand scanning and the often cumbersome transitions from hand held light to shouldering of the firearm. With the ScanPro® iC Gen 2 headlamp's ability to adjust the beam diameter to "flood" to cover a wide area, head movement is and fatigue are minimized, and the transition to shouldering a weapons is seamless.
You may ask how does the ScanPro® iC Gen 2 differ from other headlamps? Here are some of the key design attributes of the ScanPro® iC Gen 2 Headlamp:
-
ScanPro iC Gen 2 vs ScanPro iC Gen 1: The Gen 2 model is brighter, has significantly longer runtime, improved brightness control, a smoother zoom focus, and an easier LED replacement procedure.
-
Powerful Intensity Control LED based light with 46mm diameter Zoom/Focus bezel design which allows the user to quickly adjust light beam diameter from flood to zoom and control light intensity depending on the situation and the hunters preferences
-
Uses the same high power Intensity Control LED as the W403iC and A48iC lights, allowing you to swap LED's between all three models.
-
Special bezel is precision machined T6 Aircraft grade aluminum with type III hard anodization
-
Specially designed precision high magnification glass convex lens provides for extreme focus and or dispersion of light over a wide area
-
User Replaceable LEDs - switch LED colors in seconds!
-
Removable LED's is an important innovation which allows the hunter to use a specific LED color to particular hunting situations (Intensity Control LED's are available and sold separately - click HERE for more info)
-
Full Intensity Control LED - allows the hunter to adjust the brightness of the headlamp infinitely, giving them more control over the brightness and helping them to spook less animals
-
Ability to turn headlamp "ON" at ANY desired power level, depending on your preference
-
Rubberized halo shield included to minimize peripheral light spill from haloing equipment or hunting partners
-
Comfortable wide adjustable cloth/elastic headband for fatigue free usage with or without a baseball style hat
-
Operates on two Lithium-Ion 21700 rechargeable batteries
-
Batteries and charger with AC & DC charge adapter included
-
Approximate Run Time (At Full Power) - up to 8 Hours*
-
Identifiable Eye Reflection Range - Approximately 500* Yards
*Ambient light (moon phase), battery state of charge, LED color, environmental conditions, etc. can and will affect ranges. Battery state of charge, type and condition of batteries all affect run time. Actual run time may vary.
SCANPRO ic gen 2 FEATURES:
The ScanPro® iC Gen 2 Intensity Control power twist knob allows for quick, smooth brightness adjustment and features a built in on/off button. This unique design allows you to turn the headlamp directly on to ANY power setting that you desire. Simply rotate the Intensity Control knob to the intensity level you desire and then click the on/off button to power the light directly to that setting.
The ScanPro® iC Gen 2 interchangeable LED design allows you to easily and quickly change the LED. This simplified design allows you to easily change from red to green to white, depending on your specific night hunting needs. The ScanPro® iC Gen 2 uses the same Intensity Control LED as the W403iC and the A48iC night hunting lights, allowing you to swap LED's between all three units.
The ScanPro® iC Gen 2 uses a Zoom Focus Bezel, which allows you to change the width of the beam from spot to flood. Spot is great for long distance identification and scanning. Flood will give you a broad field of view for close and medium range scanning. The ScanPro® iC Gen 2 comes with a removable Rubberized Halo Shield. The Rubber texture improves the grip on the bezel while you use the zoom focus feature. The Halo Shield eliminates unwanted peripheral lighting from shining on you, your hunting partner(s), or your surroundings.
The ScanPro iC Gen 2 is designed with an elevation adjustment ability. This allows you to adjust the light up and down, depending on your needs. The ScanPro® iC Gen 2 is built onto and adjustable elastic cloth band that is designed to comfortably fit the shape of your head or hat.
four-position smart charger with four 21700 li-ion batteries:
-
Four bay Li-Ion battery charger
-
Featuring charging indicators for each individual battery
-
12 Volt DC cigarette lighter and AC power outlet and charge plug
-
Four (4ea) rechargeable button top Lithium Ion PCB (protected circuit) 21700 batteries rated at 5000 mAh
W404iC Specifications:
-
Length-Flood: 203.2mm / 8 inches
-
Length-Spot: 215.9mm / 8.5 inches
-
Bezel diameter: 79.5mm / 3.1 inches
-
Body diameter: 30mm / 1.1 inches
-
Weight (with 21700 battery installed): 15.5oz
-
Operation Environment: Minus -30 ~ 120 Degrees Fahrenheit
-
Required Battery Type: Operates on 1 21700 PCB 3.7V Lithium-ion battery or 1 18650 PCB 3.7V Lithium-ion battery
-
Purpose built and designed for night hunting by night hunters
-
Designed, serviced, and warrantied in the USA
-
Limited Lifetime Warranty: Limited Lifetime on W404iC light housing. LED assembly three years. Standard tail cap, coil cord tailcap, mounts, carry case, batteries and charger, accessories one year. See manual for details and limitations.
-
Manufacturer specifications are subject to change without notice.
-
Protected by US Patent # 11,441,743
scanpro iC gen 2 Specifications:
-
Bezel diameter: 46mm / 1.8 inches
-
Weight (with two 21700 batteries installed): 15.6oz
-
Operation Environment: Minus -30 ~ 120 Degrees Fahrenheit
-
Required Battery Type: Operates on two 21700 PCB 3.7V Lithium-ion battery or two 18650 PCB 3.7V Lithium-ion battery
-
Purpose built and designed for night hunting by night hunters
-
Designed, serviced, and warrantied in the USA
-
Limited 1-Year Warranty: Limited 1-Year on ScanPro iC Gen 2 light housing. LED assembly three years. Carry case, batteries and charger, accessories one year. See manual for details and limitations.
-
Manufacturer specifications are subject to change without notice.